43 found, showing page 2 of 3
$166.826
WHT/PST POLY FLOOR PAINT
A gloss enamel for use on interior and exterior surfaces of wood, metal, and masonry. Dries to a durable and abrasion- resistant finish that will withstand repeated scrubbings and high traffic. Ideal for use on floors, steps, walkways, andtrim. Not recommended for garage floors. Covers up to 400 sq. ft. per gallon. Dries to touch in 2 hours and to recoat in 24 hours. Allow to dry for 3 days before allowing heavy traffic. May be applied by brush, roller, or spray equipment. Clean up equipment with mineral spirits or paint thinner. Not for sale in restricted areas of California.
View Details
$140.99
WHITE MARINE TOP PAINT
A high-performance modified alkyd base coating for use above the waterline. Provides excellent gloss retention, UV resistance, flexibility and durability in extreme weather conditions. Coverage will vary with condition of surface and method of application. Quart size.
View Details
$141.123
S/G WHT MARINE TOP PAINT
A high-performance modified alkyd base coating for use above the waterline. Provides excellent gloss retention, UV resistance, flexibility and durability in extreme weather conditions. Coverage will vary with condition of surface and method of application. Quart size.
View Details
$134.99
BAT GRY MARINE TOP PAINT
A high-performance modified alkyd base coating for use above the waterline. Provides excellent gloss retention, UV resistance, flexibility and durability in extreme weather conditions. Coverage will vary with condition of surface and method of application. Quart size.
View Details
$121.192
NAVY BL MARINE TOP PAINT
A high-performance modified alkyd base coating for use above the waterline. Provides excellent gloss retention, UV resistance, flexibility and durability in extreme weather conditions. Coverage will vary with condition of surface and method of application. Quart size.
View Details
$128.627
BRT RED MARINE TOP PAINT
A high-performance modified alkyd base coating for use above the waterline. Provides excellent gloss retention, UV resistance, flexibility and durability in extreme weather conditions. Coverage will vary with condition of surface and method of application. Quart size.
View Details
$358.99
BLK MARINE BOTTOM PAINT
A protective copper-based coating for use below the waterline on the boat bottom. Hard antifouling coating slowly releases copper, preventing the build-up of barnacles, algae, and other marine growth. Use for mild to moderate fouling conditions in both fresh and saltwater. Formulated for use on both trailered boats and boats that remain in the water all season or all year long. Contains 45\% cuprous oxide (copper) which has the best category features (hard antifouling). Do Not use on aluminum surfaces as the copper in the coating will react unfavorably. Newly painted boats shoud be launched within 60 days of painting for best antifouling performance. Priming is not necessary on bare fiberglass or previously painted surfaces (lightly sanded and in good condition). To prime bare wood, apply thinned (10\% mineral spirits to 90\% antifouling paint) paint followed by a full-strength antifouling paint for subsequent coats. Bare metal needs to be primed with a 2-part industrial epoxy primer (contact Tech helpline 800/787-8258). Quart size.
View Details
$347.99
BLUE MARINE BOTTOM PAINT
A protective copper-based coating for use below the waterline on the boat bottom. Hard antifouling coating slowly releases copper, preventing the build-up of barnacles, algae, and other marine growth. Use for mild to moderate fouling conditions in both fresh and saltwater. Formulated for use on both trailered boats and boats that remain in the water all season or all year long. Contains 45\% cuprous oxide (copper) which has the best category features (hard antifouling). Do Not use on aluminum surfaces as the copper in the coating will react unfavorably. Newly painted boats shoud be launched within 60 days of painting for best antifouling performance. Priming is not necessary on bare fiberglass or previously painted surfaces (lightly sanded and in good condition). To prime bare wood, apply thinned (10\% mineral spirits to 90\% antifouling paint) paint followed by a full-strength antifouling paint for subsequent coats. Bare metal needs to be primed with a 2-part industrial epoxy primer (contact Tech helpline 800/787-8258). Quart size.
View Details
$130.99
WOOD/FBGLS MARINE PRIMER
Specialty marine primer for use above the waterline. Use antifouling paint for boat bottom preparation. Quart size. Useon wood and fiberglass.
View Details
$140.99
CLR MARINE SPAR VARNISH
A specially formulated exterior polyurethane for wood surfaces above the waterline. UV, salt and mildew-resistant coating expands and contracts with changing weather conditions. Tough, flexible, long-lasting coating adds a warm, golden glow that enhances the wood's natural beauty.
View Details
$180.99
WHT/PSTL FLOOR ENAMEL
A heavy-duty, 100\% acrylic interior/exterior gloss floor enamel that beautifies new surfaces and restores the look of worn surfaces. This paint is ideal for floors, patios, porches, steps, and trim. It provides excellent adhesion to properly prepared concrete, wood, and metal while offering exceptional abrasion resistance. Not recommended for garage floors. Covers approximately 400 sq. ft. on smooth surfaces and 300 sq. ft. on rough, textured, or porous surfaces. New concrete must be cured for at least 30 days. Dry time: Dries to touch in 1 hour, recoat in 4 hours, 24 hours for light foot traffic, and 7 days for heavy foot traffic. Clean up tools, spills and splatters immediately with soap and water.
View Details
$145.116
EX DEEP FLOOR ENAMEL
A heavy-duty, 100\% acrylic interior/exterior gloss floor enamel that beautifies new surfaces and restores the look of worn surfaces. This paint is ideal for floors, patios, porches, steps, and trim. It provides excellent adhesion to properly prepared concrete, wood, and metal while offering exceptional abrasion resistance. Not recommended for garage floors. Covers approximately 400 sq. ft. on smooth surfaces and 300 sq. ft. on rough, textured, or porous surfaces. New concrete must be cured for at least 30 days. Dry time: Dries to touch in 1 hour, recoat in 4 hours, 24 hours for light foot traffic, and 7 days for heavy foot traffic. Clean up tools, spills and splatters immediately with soap and water.
View Details
$164.99
NEUTRAL FLOOR ENAMEL
A heavy-duty, 100\% acrylic interior/exterior gloss floor enamel that beautifies new surfaces and restores the look of worn surfaces. This paint is ideal for floors, patios, porches, steps, and trim. It provides excellent adhesion to properly prepared concrete, wood, and metal while offering exceptional abrasion resistance. Not recommended for garage floors. Covers approximately 400 sq. ft. on smooth surfaces and 300 sq. ft. on rough, textured, or porous surfaces. New concrete must be cured for at least 30 days. Dry time: Dries to touch in 1 hour, recoat in 4 hours, 24 hours for light foot traffic, and 7 days for heavy foot traffic. Clean up tools, spills and splatters immediately with soap and water.
View Details
$161.687
LT GRAY FLOOR ENAMEL
A heavy-duty, 100\% acrylic interior/exterior gloss floor enamel that beautifies new surfaces and restores the look of worn surfaces. This paint is ideal for floors, patios, porches, steps, and trim. It provides excellent adhesion to properly prepared concrete, wood, and metal while offering exceptional abrasion resistance. Not recommended for garage floors. Covers approximately 400 sq. ft. on smooth surfaces and 300 sq. ft. on rough, textured, or porous surfaces. New concrete must be cured for at least 30 days. Dry time: Dries to touch in 1 hour, recoat in 4 hours, 24 hours for light foot traffic, and 7 days for heavy foot traffic. Clean up tools, spills and splatters immediately with soap and water.
View Details
$566.356
BB PRO FLOOR DARK GRAY 5GAL
BULL-BOND® PRO FLOOR™ is an acrylic, high resistance floor paint. This high performance product is specially designed to provide a tough coating with high adhesion strength, abrasion resistance, chemical resistance, hot tire pickup resistance and heavy traffic resistance. Pro Floor™ is formulated with an ultra-small particle size polymer technology and a rigid hydrophobic latex that creates a durable floor coating for concrete surfaces.
BASIC USES
High-Resistance Floor Coating for:
Driveways
Garage Floors
Workshop Floors
Pavements
Patios
Parkings
BULL-BOND® PRO FLOOR™ is suitable for interior and exterior conditions on horizontal surfaces for the previously mentioned applications.
View Details